Quick Detail:
| Name |
Epoxy Resin 1224 |
Usage |
Woodworking |
|
Mixing Ratio |
A: B = 2:1 (By weight) | Curing time |
About 10-12 hrs at room temperature |
Description:
Our Epoxy resin can be cured under normal temperature, two components system hard resin, natural defoaming, yellow resistance, high transparency, bright in surface, it can be also cured at high temperature for faster curing.
Features:
1.Can cure at room temperature or heating curing,
2.Can automatic antifoaming
3.Can automatic leveling
4.Cured without ripples, no bubbles
5.Good transparency and excellent surface gloss
6.After dry it is with high hardness as stones
7.With high gloss like mirror
| Items | Units/conditions |
Technical Data
|
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
Notice:
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.
FAQ:
Q1. Will the Table Epoxy Resin turn yellow over time?
A: No, because we add HALS, which is UV protection, it won't change yellow.
Q2. Does this Table Epoxy Resin tend to scratch over time?
A: Our product is Scratch Resistance, Heat Resistance, Electrical resistance.
Q3. What is the ideal temperature to make mixtures?
A: The optimal temperature is 25 degrees celsius, because our laboratory temperature is 25 degrees celsius, but a little hotter or colder is also ok.
Q4. How long can last if it is not mixed?
A: The shelf life is about 12 months, if you keep it well.
Q5. What payment terms do you accept?
A: Payment for TT, LC at sight. If you have good Credit or we cooperate long time, the OA, DP, CAD also workable.
Q6. Could you accept OEM for Table Epoxy Resin?
A: Yes, we can do the packing according to your demand, the packing bag and the label all can do your brand.
Q7: What tool or other material do I need for Table Epoxy Resin?
A: You need a weighing machine and a container to hole the resin. If do river table or Art Crafts you may need some pigments and accessories.
