Quick Detail:
| Name |
Epoxy Resin 2467 |
Feature |
Low odor,Low viscosity,High transparency,Long potlife |
|
Mixing Ratio |
A: B = 2:1 (By weight) | Curing time |
10-12hrs;Can polish after 24-48hrs,(Different thickness will affect the curing time) |
Description:
1. Aorun clear and transparent epoxy resin AB glue made from basic pure resin and do well in adhesive.
2. Good at UV and yellow resistance,self leveling,without bubble,high brightness.
3. Can be cured at nomal temperature or by heating.
4. Clear,low viscosity,nature defoaming, super transprency and good performance after mixed.
5. Can get any color you want by add pigments.
6. Easy to clean and repair.
7. No ripple,bright in surface,odourless,eco-friendly,nontoxic,waterproof and so on.
Application:
For rugged or deep casting, this transparent epoxy razor is the "line top" known for its quality epoxy profile, which can be used in many applications: - jewelry, furniture, promotional products, prize flowers, paintings, handicrafts, products "Throw" products, etc. The quality multifunctional oil is our thicker or even deeper crystalline epoxy resin for every amount we use in our work - and at an extra cost!
Features:
Environmental , strong and long-lasting adhesion, good waterproof performance, fast curing, long service life.
1. Can cure at room temperature or heating curing,
2. Can automatic antifoaming
3. Can automatic leveling
4. Cured without ripples, no bubbles
| Items | Units/conditions |
Technical Data
|
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
Warning:
1. Use up once opened .Otherwise must seal the preservation strictly.
2. Avoids the skin or the eye contact, if contacts carelessly, uses the massive clear water to flush and to go see a doctor immediately.
3. The working conditions maintain enough ventilate.
4. Keep away from children.
FAQ:
One: what reason is glue occurrence does not stick and do not cure?
Answer: this type of glue must be in accordance with its ratio, and it is the electronic weight ratio, not the volume ratio. Also, look at the temperature. If it's too cold, it's recommended to heat it up to 25 degrees before stirrig.
Second: we do not have vacuum equipment, how to defoaming?
Answer: dear, there is no vacuuming equipment no matter, our glue is natural defoaming, glue thoroughly after mixing, stationary 5-20 minutes, can automatically defoaming.
Three: why is our glue seven days old and still not solidified?
Answer: if the product is hard glue for 3 days and soft glue for 7 days and still does not cure, 1. Please check whether the ratio is based on weight; 2. 2. Whether the stirring method is correct or not. Considering environmental protection and safety, the curing agent is water-based, which is as thin as water. 3. If you can confirm that there is no problem with 1 and 2, then this is very important. The proportion of A component +B component of the primary glue should be more than 50 grams, and the proportion must be weighed by electrons.
Four: I still don't understand what to do?
Answer: then please contact our customer service, we are ready to serve you 24 hours a day.
